build your kit at


The WaterCUBE GT3

The WaterCUBE GT3 guarantees shiver performances and temperatures of exercise under control also with emiting CPU more than 100 Watts (power calculated with overclocked and under stress CPU).
The kit includes the Waterblock, the clip of fixing on socket A/370 and 2,5 mt of Crystal Extraflex pipes.

Size: 50x50x47 mm.
Weight: 260 gr.
Material: Copper,Aluminum
Pipes: internal diameter 8 mm. - outside diameter 12 mm - thickness 2 mm

Next-Cool guarantees all of his products 24 months from defects of manufacture.

innovakool 3.0 mounted on PC2

The AGB-O-Matic

The AGB-O-Matic is used for filling and de-aerating a water cooling system. The use of this device is very simple: You just need to plug it onto the EHEIM pump. Then, the pump can suck in the fresh water directly and absolutely free of blow holes.
Despite of the slim design of 50x56x120 mm, the AGB-O-Matic provides a huge filling volume. The tank is leakproofed which makes it possible to transport the device easily. After installing the AGB-O-Matic, the water cooling system is filled though the aparture at the top (see picture).

The AGB-O-Matic is optimized for the Eheim pumps 1046 and 1048. It consists of glass fibre reinforced plastics.
As standard, the runback flow is equipped with one 8x1 screw connection. The 1/4 inch screw thread makes it possible to use other connectors and therefore to combine the AGB-O-Matic with tubes that have other diameters.

Technical facts:
Weight: 110 g
Material: Glass fibre reinforced plastics
Dimensions (without the pump): 50x56x120 mm
Fits with Eheim 1046 and 1048
Equipped with one 8x1 screw connection
Watercool HTF2-Dual 2.0
The features in detail:
  • Very powerful design with large surface (the copper pipe is more than 6 m long)
  • the cooling liquid flows parallel through the pipes at the same time which helps to avoid streaming loss
  • Turbo fins for optimal heat dissipation
  • Antechamber for the air which provides consistent pressure build-up
  • Optimized for slow rotating fans with a diameter of 120 mm
  • fan installation using included screw threads
  • screw threads at both sides of the cooling unit for installation in or at the case
  • high quality material
  • G ¼ inch screw-in sockets for installation with all connecting systems
  • robust powder coating

Material: Pipes: copper (diameter 8 mm), Fins: aluminium, Sides: stainless steal
Dimensions outside: 285 x 137 x 58 mm
Installation: 8x M4 screw threads on top (for two fans with a diameter of 120 mm), 4x M4 screw threads at both sides (for the installation in or at the case)
Compressive strength: until 30 bar
Surface: black, powder coating, stainless steal, polished
Connection: 2x screw threads G ¼ inch (angel of 90°)
Included in delivery: HT-Flat, instructions for installation, 8x M4 screws, hex-wrench, 2-year-guarantee for pressure tightness and workmanship

Electronic add-on module for flow monitoring

Flow-O-Matic electronic flow monitoring is used for active electronic flow monitoring in the water circulation of your watercooling.It is simply put into the cycle and then emits a signal, as long as a flow is present.It is simply attached to the Main board and the emited signal can be analyzed by the BIOS or suitable software (e.g. MBM). It contains also 2 bue leds.
Eheim 1048 Centrifugal pump

1048 Centrifugal pump
Pump performance 600 l/h
Hoisting hight 1,50 mWs
Power consumption 10 W
Tube connection suction-sided (ingoing) Ã?13mm
Tube connection pressure-sided (outgoing) Ã?13mm
Measurements mm 145 x 75 x 118 mm

The pump is hardly audible and can be used in and outside of the water. It has a 220 volt connection.
2 Titan Fan 120x120x25

Dimensions: 120x120x25mm
Voltage: 12 Volt
Air flow: 2,30³/min
revolutions: 2000 r/min
Volume: <36dB

This fan has a very good cooling performance and can still be run at 7 V without losing much performance. Furthermore, it passes the number of revolutions on to the Mainboard.

In the extent of supply 4 screws are included for attachment to the casing or the radiator.
Total260â?¬ (euro)

You might like also

No Thumbnail was found
Mes conseils: Toujours couper les tuyaux avec un cutter pour avoir une coupe bien droite (pas au ciseaux) Vérifier bien le sens de circulation de l'eau, si c'est à l'envers le kit risque de faire beaucoup trop de bruits... Point forts: Qualité du kit et des différents composants de trés bon à génial... Des tuyaux fluos jaune en standard et de quoi tuyauter 2 ordinateurs sans probléme. Point faibles: Beaucoup trop de place pris par ce systéme dans votre tour!!!! …
5257 Days ago
No Thumbnail was found
112x112x150mm, 692 Gr - No Comment …
5496 Days ago
Should't We open a museum of PC case?
They're is also a lot of internet page on the subject, as usual, google is Your friend! Some people are really pushing the art of PC case modding to its limit: AquaSphere is an example...(a small robot also open the door and the inside is even more crazy)Puzzlebox Hellraiser modWMD (Weapon of Mass Destruction)But Why the Hell ;-) still having a computer motherboard inside these beauties? just for seing some blue screen of death :-) …
5496 Days ago
No Thumbnail was found
In the past 2 weeks, I use to have my watercooling pump (Eheim 1048) making a very bad noise for the first time after 1.5 years of 24/7 operations...and I found this page:A german one: Der Eheim Mod 1+2 -Abhilfe bei lauter 1048/1046 Pumpe ? the trick is to wrap teflon tape around the impellor and then replacing the head back (pictures are self explanatory)I've done the mods and ......lovely the silence of operations is back!!! thanks to all persons …
5496 Days ago
No Thumbnail was found
Materials: AMD Athlon XP 1700+ Thoroughbred @ XP 3300+ JIUHB 0308/10 AXDA1700DLT3C XPMW(1,5V) - unlocked multiplier - cost 82€ This is probably one of the best stepping ever produced as today (6.06.2003) by AMD, far away better then JIUHB, JIUGB and JIUCB with the revision DUT3C. The core is using as default only 1.5V instead of 1.6V (JIU*B stepping)! When using 1.55V, this kind of cpu is handling a confortable XP-2800. Pushing it to limit (1.775V) let me reach 2500MHz …
5646 Days ago
 ConclusionsPC1: true Xp2800+ (not Barton) on Nforce2 Asus A7N8X deluxe - 1024MbPC2: true XP1700+@2350MHz on Nforce2 Asus A7N8X deluxe -512 Mbclick here to hear my system running on <1 Fan> <2 Fans> <No Fan>RatingA must for ears, so quiet and so easy to install (only if you reduce voltage of fans from 12V to 5V as on PC2).I recommend you a middle or big tower to install everything inside (as on PC1)I recommend you to choose the smallest radiator …
5651 Days ago
Overclocking results
 Result from overclockingXP1700(1470MHz) @2350MhzNforce2 Asus A7N8X deluxe -512 MbBios 1004Voltage 1.65VFSB: 211MHzMultiplier: 11Better than a Barton XP3200+CPU Speed  FSB Core Speed Multiplier Core Voltage Athlon XP 3200+ Barton4002.2 Ghz111.65Athlon XP 3000+ Barton3332.17 GHz 131.65vAthlon XP 2800+ Barton3332.08 GHz 12.51.65vAthlon XP 2500+ Barton3331.83 GHz 111.65vAthlon XP 2800+3332.25 GHz13.5x1.65vAthlon XP 2700+3332.17 GHz13x1.65vAthlon XP 2600+2662.13 GHz16x1.65vAthlon XP 2400+2662.00 GHz15x1.65vAthlon XP 2200+2661.80 GHz 13.5x1.65VAthlon XP 2100+2661.73 GHz 13.0x1.60VAthlon XP 2000+2661.67 GHz 12.5x1.60VAthlon XP 1900+2661.60 GHz 12.0x1.50VAthlon XP 1800+2661.53 GHz 11.5x1.50V->Athlon XP 1700+2661.47 …
5651 Days ago
My setup (Gallery)
 Installation in picturesin 05.2004, running 24/7 since august 2003add a transparent big tank o matic (42â?¬) a lot easier to watch water level, and radiator legs (22â?¬), 12cm Fan are located below temporary in middle tower in 2003 …
5651 Days ago
Building and assembling
 Opening the bag...and putting things together...Eating candy provided while mounting kitSome candy are provided in kit, a nice gift...thanks RadiatorInstalling the ventilator: Attention, with the kit of my brother (bought on ) we receive a SANFU radiator with a Paps ventilator mounted on it. After installing everything, we try the system: 65°C and the system reboot (35°C in room) fact the ventilator was extracting air and not pushing fresh air on the radiator. I reversed the air …
5651 Days ago