Hard task because of the canopy, or space left by the frame

 
example 1  


You might like also

An original way to mount the sensor
An original way to mount the sensor by sgunn911 "Finding out that the GV-1 Brackets were not meant to be used with a Caliber 30's clutch hub being directly in the way, I decided to get creative. This worked out perfect, and is probably better that the normal installation method. I used a cooling fan from Correct, (item 416-141) and used the rim around the top to install the magnet. I then mounted the sensor on the TOP of the …
5456 Days ago
a remote starter plug
I recommend not to mount one! sometimes it is better to always remove the canopy...you can discover mechanical bug and do a quick check before each new flight. cheap way by elta68 better looking by CK_ …
5470 Days ago
header tank
On my caliber 1, using double side tape. use zip tie to secure the tank... On my caliber 2.... Help to balanced the heli if needed. Won't work with a raptor 30 canopy. by Steve_JR by the Joeker …
5470 Days ago