Enable 1200 mw Mode on DJI FPV System
NOTES
You should follow your local regulations regarding which mode to use.
Long term hardware effects are unknown
You get more or less 30% more range
Your system must be already in FCC mode
Enable Power Limit as it add some protections against overheating.
Create a .txt file, name it
naco_pwr.txtType
pwr_2or pwr_1- pwr_1 = 1000 mW
- pwr_2 = 1200 mW & 1000 mW
Save and close
Copy
naco_pwr.txtto an SD cardPut SD card in DJI goggles
Power on Goggles and Air Unit
Now in the Goggles menu, under Settings -> Device, you should be able to select 1200 mW or 1000 mW
Enable FCC Mode on DJI FPV System (700mw 8 Channels)
In CE mode, the maximum output is limited to 25 mW, and there are only 4 channels available, while in FCC mode those numbers are increased to 700 mW and 8 channels.
NOTE that you should follow your local regulations regarding which mode to use.
How to switch to FCC mode from CE mode
- Take the micro SD Card out of the Air Unit
- Create a text file on the root directory, name it
naco.txt - Write
1in the file, which means FCC mode for USA or any other number according to this list:- 1 – FCC mode for US, 8 Channels
- 2 – FCC mode for Canada 4 Channels
- 3 – HK CE 4 Channels
- 4 – CN SRRC 4 Channels
- 5 – JP Japan 3 Channels
- 6 – KR Korea 4 Channels
- 7 – BR Brazil 4 Channels
- 8 – FR CCA 4 Channels
- Insert SD card in the Air Unit
- Power up goggles, and then Air Unit
in the Player menu you should see now 8 channels.
Attention updating the firmware on your DJI FPV goggles and Air Unit will always reset the power setting back to the default settings according to your region!
